Connection Guideline for Epson iProjection V3.32 (Windows 11)

This guideline provides steps on how to connect Windows 11 based operating system to the projector using Epson iProjection V3.32.



Connection to Projector

Step 1: Turn on the projector.

Step 2: Wait until it displays the screen below.

Note: If this screen does not appear. Click on LAN in Step 1.

Step 3: Click on Advanced Connection Mode. Then click OK.

Step 4: Click on Manual search.

Step 5: Key in the “IP Address” from step 2, Select the first option, then click Join.

Step 6: Key in the “Keyword” from Step 1. Then click OK.

Result: Connection Complete. The panel on the bottom right should appear.


Connection to multiple Projectors

Step 1: Turn on all the projectors.

Step 2: wait until this screen is displayed on the projectors.

Screen 2.

Note: If the screen above fails to be displayed. Press LAN from Step 1.

Step 3: Click on Advanced Connection Mode. Then click OK.

Step 4: Click on Manual search.

Step 5: Key in both “IP Address” from step 2, Check both boxes. Then click Join.

Step 6: Key in the first “Keyword” from the first projector.

Step 7: Key in the second “Keyword” from the second projector.

Result: The following screen should be displayed on all the projectors that is connected.


 

Copyright © Asia Pacific University. All Rights Reserved.