Connection Guideline for Epson iProjection V3.32 (MacOS (Intel))
This guideline provides the steps on how to connect Mac (Intel) based operating system to the projector using Epson iProjection V3.32.
Connection to Projector
Step 1: Turn on the projector.
Step 2:Wait until it displays the screen below.
Note: If the above screen does not appear, Press LAN in Step 1.
Step 3: Click on Advanced Connection Mode. Then click OK.
Step 4: Click on Manual search.
Step 5: Key in the “IP Address” from step 1, Select the first option, then click Join.
Step 6: Key in the “Keyword” from Step 1. Then click OK.
Result: Connection Complete. The panel on the bottom right should appear.
Connection to multiple Projectors
Step 1: Turn on all the projectors.
Step 2: wait until this screen is displayed on the projectors.
Screen 2.
Note: If the screen above fails to be displayed. Press LAN from Step 1.
Step 3: Click on Advanced Connection Mode. Then click OK.
Step 4: Click on Manual search.
Step 5: Key in the first “IP Address”. Click Search.
Step 6: Key in the second “IP Address”. Click Search.
Step 7: Check both boxes and click Join.
Step 6: Key in the first “Keyword” from the first projector. Click OK.
Step 7: Key in the second “Keyword” from the second projector. Click OK.
Result: Connection established if this bar appears on your screen..
Copyright © Asia Pacific University. All Rights Reserved.