Car Parking Entry & Exit Instructions

This is a instructional guide of APU Campus car parking at Zone A & Zone B, for students and staff;

1 Entry Guide
2 Exit Guide

Entry Guide

Step 1 - Stop your vehicle in front of the parking barrier gate.

Step 2 - Tap your APCard on the sensor located at the parking entrance. The barrier gate will open and the sensor will display your remaining

Please hold for at least 2 seconds in order for the reader to complete reading your card

If the barrier gate does not open during this process, it will be due to:

Your card is not activated.
You card has an invalid status due to incomplete entry-exit cycle. (Note: Please refer to the Exit Procedures and please ensure that you follow the Exit Procedures to avoid this issue from happening).
You have an insufficient balance on your card.

If the scenarios above happen, please redirect your vehicle to the visitor parking and please proceed to Payment Counter at Level 3, Spine to activate your card/top up the balance of your card.

Step 3 - Proceed to the designated parking floor:

Students: Level 2
Staff: Level 1

Exit Guide

Step 1 - Stop your vehicle in front of the parking barrier gate.

Due to safety reasons, if your distance with the car ahead of you is too near, the barrier gate will remain open. Please stop and do not attempt to exit the parking without tapping your card at the sensor.

Step 2 - Tap your APCard on the sensor located at the parking exit. The barrier gate will open and the sensor will display your remaining balance.

If the scenario above happen, please redirect your vehicle back to parking and please proceed to Payment Counter at Level 3, Spine to top up the balance of your card.

Step 3 - Upon successful completion of Step 2, please exit the parking.