This is a step-by-step process on how to connect to projectors using Epson easyMP V2.86 for Windows 11. This entire article will be divided into 2 sections; connecting to one and multiple projectors.
Table of Content:
Connecting to One Projector
Step 1: Turn on the projector by pressing the button shown.
Step 2: Wait until it displays this on the screen.
If this screen does not appear. Click on LAN in Step 1.
Step 3: Click on Advanced Connection Mode and click OK.
Step 4: Click Manual Search.
Step 5: Insert the “IP address” displayed on the screen, then click OK.
Step 6: Once the projector is found, click the box next to the projector icon and click Connect.
Step 7: Insert the “Keyword” displayed on the screen, then click OK.
Result: The panel at the bottom right will appear if the connection is successful.
Connecting to Multiple Projector
Step 1: Turn on the projector by pressing the button shown.
If this screen does not appear. Click on LAN in Step 1.
Step 2: Wait until it displays this on the screen
Screen 1
Screen 2
Step 3: Click on Advanced Connection Mode and click OK.
Step 4: Click Manual Search.
Step 5: Insert the “IP address” displayed on the screen, then click OK. Do this for Screen 1 and Screen 2.
Screen 1
Screen 2
Step 6: Once both projectors are found, click the box next to the projector icon and click Connect.
Step 7: Insert the “Keyword” displayed on the screen, then click OK. Do this for Screen 1 and Screen 2.
Screen 1
Screen 2
Result: The panel at the bottom right will appear if the connection is successful.
