Bus Terminal Setup Guideline

How to Add a New Bus Terminal

Step 1- Open Idiya > E-Purse>Terminal Setting

Open

Step 2- Fill in all the required fields as shown below, then click the Save button.

• Terminal ID – Enter the ID number for the terminal.

• Description – Enter the name of the bus route.

• Terminal Type – Select Bus Terminal from the dropdown menu.

Open

How to Set Up the Bus Terminal

Step 1-

Open Idiya > E-Purse> Bus Terminal Setting

Open

Open

There are four sub-settings you need to configure:

1. Bus Route Setting

2. Terminal Route Setting

3. Display Setting

4. Route Payment Setting

Bus Route Setting

The Bus Route Setting is used to add a new bus route. To do this:

• Enter the Route Code and Description.

• Click the Save button to store the new bus route.

Open

Terminal Route Setting

In the Terminal Route Setting, you can map the Terminal ID to its corresponding Route Code.

• Select the Terminal ID.

• Choose the Route Code by clicking on the route code list.

• Click the Save button to complete the mapping.

Open

Display Setting

The Display Setting allows you to define what will be shown on the system display.

• Manually enter the desired display message or wording.

• Click the Save button to apply the changes.

Open

Route Payment Setting

The Route Payment Setting is used to configure payment details for each bus route. Follow the steps below:

• Select the Route Code you want to configure.

• Set the following values:

  • Min Value Before Entry: 100

  • Avoid Back-to-Back Scan: 1

  • Holiday Charge: 0

  • Free Day: Ensure all days are unticked

• Payment Rate Setting:

  • Tick the checkbox for Weekday is the same rate

  • Time From: 00

  • Time To: 23

  • Charge per Entry: Enter the fare amount

  • Click Change Rate — the rate will appear in the table

  • Click Save to apply the settings

• Repeat the same steps for configuring Payment for Staff.

Open

How to Load the Bus Terminal Settings to the Bus

This process must be completed in the control room (CCTV). Only two settings need to be configured:

• Time Setting

• Payment Policy

Time Setting

• Click on Read Terminal Date and Time.

• If the terminal date and time do not match the PC date and time, click Set Time to synchronize them.

Open

Payment Policy Setting

• Click Upload All Payment Setting to upload and apply all payment policies to the bus terminal.

Open