This is a instructional guide of APU Campus car parking at Zone A & Zone B, for students and staff;
Step 1 - Stop your vehicle in front of the parking barrier gate.
Step 2 - Tap your APCard on the sensor located at the parking entrance. The barrier gate will open and the sensor will display your remaining
Please hold for at least 2 seconds in order for the reader to complete reading your card
Please hold for at least 2 seconds in order for the reader to complete reading your card
If the barrier gate does not open during this process, it will be due to:
|
Step 3 - Proceed to the designated parking floor:
Students: Level 2
Staff: Level 1
Step 1 - Stop your vehicle in front of the parking barrier gate.
Due to safety reasons, if your distance with the car ahead of you is too near, the barrier gate will remain open. Please stop and do not attempt to exit the parking without tapping your card at the sensor. |
Step 2 - Tap your APCard on the sensor located at the parking exit. The barrier gate will open and the sensor will display your remaining balance.
Please hold for at least 2 seconds in order for the reader to complete reading your card.
Please hold for at least 2 seconds in order for the reader to complete reading your card.
If the barrier gate is open before this process, please continue to tap your card on the sensor to complete your entry-exit process. Failure to do so will result in your card being unable to be recognized at your next entry. If you are under the Daily Parking scheme, failure to complete your entry-exit cycle within the same day will also result in your balance being deducted for multiple daily parking rates, as if you have parked overnight. |
If the barrier gate does not open during this process, it will be due to:
|
Step 3 - Upon successful completion of Step 2, please exit the parking.